# ==== Purpose ====
#
# Verify that START SLAVE UNTIL replicates until the given binlog
# position but not longer.  Verify that START SLAVE UNTIL with various
# incorrect arguments gives an error.
#
# ==== Method ====
#
# On master, create a table and insert some rows.  On slave, START
# SLAVE UNTIL so that it reads one event at a time, and check the
# table and the slave status each time.
#
# Then, on slave, run START SLAVE UNTIL with incorrect arguments and
# verify that it gives an error.
#
# ==== Related bugs ====
#
# Bug in this test: BUG#37717: rpl.rpl_stm_until 'stmt' fails sporadically on pushbuild

-- source include/have_binlog_format_mixed_or_statement.inc
-- source include/master-slave.inc

# Test is dependent on binlog positions

# Stop slave before it starts replication.  Also sync with master
# to avoid nondeterministic behaviour.
--echo [on slave]
sync_slave_with_master;
--source include/stop_slave.inc

--echo ==== Create some events on master ====

--echo [on master]
connection master;
create table t1(n int not null auto_increment primary key);
insert into t1 values (1),(2),(3),(4);
let $master_log_pos_1= query_get_value(SHOW MASTER STATUS, Position, 1);
let $master_log_file= query_get_value(SHOW MASTER STATUS, File, 1);
drop table t1;
create table t2(n int not null auto_increment primary key);
insert into t2 values (1),(2);
let $master_log_pos_2= query_get_value(SHOW MASTER STATUS, Position, 1);
insert into t2 values (3),(4);
drop table t2;

--echo ==== Replicate one event at a time on slave ====

# try to replicate all queries until drop of t1
--echo [on slave]
connection slave;
--replace_result $master_log_file MASTER_LOG_FILE $master_log_pos_1 MASTER_LOG_POS
eval start slave until master_log_file='$master_log_file', master_log_pos=$master_log_pos_1;
--source include/wait_for_slave_io_to_start.inc
--source include/wait_for_slave_sql_to_stop.inc
# here table should be still not deleted
select * from t1;
--let $slave_param= Exec_Master_Log_Pos
--let $slave_param_value= $master_log_pos_1
--source include/check_slave_param.inc

# this should fail right after start
--replace_result 291 MASTER_LOG_POS
start slave until master_log_file='master-no-such-bin.000001', master_log_pos=291;
--source include/wait_for_slave_io_to_start.inc
--source include/wait_for_slave_sql_to_stop.inc
# again this table should be still not deleted
select * from t1;
--let $slave_param= Exec_Master_Log_Pos
--let $slave_param_value= $master_log_pos_1
--source include/check_slave_param.inc

let $relay_log_file= slave-relay-bin.000003;
let $master_log_pos= $master_log_pos_2;
source include/get_relay_log_pos.inc;
# try replicate all up to and not including the second insert to t2;
--replace_result $relay_log_pos RELAY_LOG_POS
eval start slave until relay_log_file='$relay_log_file', relay_log_pos=$relay_log_pos;
--source include/wait_for_slave_io_to_start.inc
--source include/wait_for_slave_sql_to_stop.inc
select * from t2;
--let $slave_param= Exec_Master_Log_Pos
--let $slave_param_value= $master_log_pos
--source include/check_slave_param.inc

# clean up
start slave;
--echo [on master]
connection master;
--echo [on slave]
sync_slave_with_master;
--source include/stop_slave.inc

--let $exec_log_pos_1= query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1)
# this should stop immediately as we are already there
--replace_result $master_log_file MASTER_LOG_FILE $master_log_pos_2 MASTER_LOG_POS
eval start slave until master_log_file='$master_log_file', master_log_pos=$master_log_pos_2;
--source include/wait_for_slave_io_to_start.inc
--source include/wait_for_slave_sql_to_stop.inc
--let $slave_param= Exec_Master_Log_Pos
--let $slave_param_value= $exec_log_pos_1
--source include/check_slave_param.inc

--echo ==== Test various error conditions ====

--replace_result 561 MASTER_LOG_POS
--error 1277
start slave until master_log_file='master-bin', master_log_pos=561;
--replace_result 561 MASTER_LOG_POS 12 RELAY_LOG_POS
--error 1277
start slave until master_log_file='master-bin.000001', master_log_pos=561, relay_log_pos=12;
--error 1277
start slave until master_log_file='master-bin.000001';
--error 1277
start slave until relay_log_file='slave-relay-bin.000002';
--replace_result 561 MASTER_LOG_POS
--error 1277
start slave until relay_log_file='slave-relay-bin.000002', master_log_pos=561;
# Warning should be given for second command
start slave sql_thread;
--replace_result 776 MASTER_LOG_POS
start slave until master_log_file='master-bin.000001', master_log_pos=776;

#
# bug#47210  first execution of "start slave until" stops too early  
#
# testing that a slave rotate event that is caused by stopping the slave
# does not intervene anymore in UNTIL condition.
#

connection slave;
source include/stop_slave.inc;
--disable_warnings
drop table if exists t1;
--enable_warnings
reset slave;
--replace_result $MASTER_MYPORT MASTER_PORT
eval change master to master_host='127.0.0.1',master_port=$MASTER_MYPORT, master_user='root'; 

connection master;
--disable_warnings
drop table if exists t1;
--enable_warnings
reset master;
create table t1 (a int primary key auto_increment);
save_master_pos;
let $master_pos= query_get_value(SHOW MASTER STATUS, Position, 1);

connection slave;
start slave;
sync_with_master;

# at this point slave will close the relay log stamping it with its own
# Rotate log event. This event won't be examined on matter of the master 
# UNTIL pos anymore.
source include/stop_slave.inc;
let $slave_exec_pos= query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1);

--echo master and slave are in sync now
let $diff_pos= `select $master_pos - $slave_exec_pos`;
eval select $diff_pos as zero;

connection master;
insert into t1 set a=null;
let $until_pos= query_get_value(SHOW MASTER STATUS, Position, 1);
insert into t1 set a=null;
select count(*) as two from t1;

connection slave;
--replace_result $master_log_file MASTER_LOG_FILE $until_pos UNTIL_POS;
eval start slave until master_log_file='$master_log_file', master_log_pos= $until_pos;
source include/wait_for_slave_sql_to_stop.inc;
let $slave_exec_pos= query_get_value(SHOW SLAVE STATUS, Exec_Master_Log_Pos, 1);
--echo slave stopped at the prescribed position
let $diff_pos= `select $until_pos - $slave_exec_pos`;
eval select $diff_pos as zero;
select count(*) as one from t1;


connection master;
drop table t1;

connection slave;
start slave;
sync_with_master;

 # Bug #47142  	"slave start until" stops 1 event too late in 4.1 to 5.0 replication
#
# testing fixes that refine the start position of prior-5.0 master's event
# and by that provide correct execution of 
# START SLAVE UNTIL ... master_log_pos= x;
# Keep the test at the end of the file because it manipulates with binlog files 
# to substitute the genuine one with a prepared on 4.1 server.
#

--source include/rpl_reset.inc

connection master;
flush logs;
let $MYSQLD_DATADIR= `select @@datadir`;
--remove_file $MYSQLD_DATADIR/master-bin.000001
--copy_file $MYSQL_TEST_DIR/std_data/bug47142_master-bin.000001 $MYSQLD_DATADIR/master-bin.000001

connection slave;
stop slave;
reset slave;
start slave until master_log_file='master-bin.000001', master_log_pos=294 /* to stop right before DROP */;
--source include/wait_for_slave_sql_to_stop.inc

show tables /* t1 must exist */;

# clean-up of Bug #47142 testing

drop table t1; # drop on slave only, master does not have t1. 
stop slave;

# End of tests
--let $rpl_only_running_threads= 1
--source include/rpl_end.inc